Coated Inkjet Adhesive Paper 135g A4 A3 Adhesive Glossy Paper High Resolution

Q1: What should I consider regarding the 135g weight in actual use? Is heavier always better?

Not necessarily. 135g is a lightweight to medium-weight adhesive paper, balancing stiffness and flexibility.

• For flat, rigid surfaces (glass, labels, cartons): 135g is sufficient, offering good conformability and resistance to edge lifting.

• For curved or small-diameter containers: 135g is superior to heavier papers (e.g., 160g+), as it bends easily without springing back.

• For outdoor or high-wear applications: Consider heavier media (e.g., 180g+) or laminated films for added durability.

Q2: How can I evaluate the adhesive quality when sourcing this paper?

Focus on three key aspects:

• Initial tack: Does it stick quickly after peeling off the release liner? Low-quality adhesives tend to shift or fail to grab.

• Holding power & temperature resistance: Is it rated for -10°C to 60°C? High temperatures may cause oozing, while low temperatures can make the adhesive brittle.

• Removability: Most 135g inkjet adhesive papers use permanent pressure-sensitive adhesive. If temporary or repositionable application is needed, be sure to specify a "removable adhesive" version; otherwise, removal may leave residue or damage the surface.

Q3: What ink compatibility requirements should I consider when sourcing this paper?

Two key points must be verified:

• Compatibility with both dye and pigment inks: Lower-cost products often work only with dye inks, causing pigment inks to pile or not dry properly. High-quality 135g glossy paper will clearly state "pigment-compatible."

• Support for high ink coverage: For full-color photos or dark background designs, a microporous quick-dry coating is essential. Otherwise, ink pooling may cause smudging, sticking, or even paper jams inside the printer.

Q4: How can I avoid products with "fake gloss" or severe fading after printing?

Perform two quick tests before bulk purchasing:

• Gloss uniformity test: Tilt the paper under light to check for "rainbow patterns" or dull spots. Acceptable products show even reflection.

• UV & water resistance test: Print a high-density color block, let it dry for 2 minutes, then rub gently with a damp finger. Significant color transfer indicates poor ink fixation, making the paper unsuitable for short-term outdoor or humid environments. Additionally, ask the supplier for lightfastness ratings (e.g., ISO 105) if available.